View Enquiry List 
<
>
785502 - ALLEGRO™ II PERISTALTIC PUMP SYSTEM
The KD Scientific Allegro™ II Peristaltic Pump System allows maintenance free, continuous flow pumping of various liquids. The fluid contacts only the inside surface of the tubing negating concern for valves, O-rings or seals that might be incompatible with fluid being pumped.
WhatsappOverview
Features
- Two channel pump head
- Two simultaneous individual flows or one combined flow
- Flow rates up to 720 ml/min with combined channels
- Accepts tubing ID sizes 0.8 mm (0.03 in) - 4.8 mm (0.19 in)
- Compatible with Masterflex® L/S® 13, L/S® 14, L/S® 16 and L/S® 25 tubing
- Clearly displays flow rate and total dispensed volume
- User configurable multi-step operation
- Dispenses in forward or reverse direction
- Adjustable flow rate while pump is running
- Stackable sealed remote pump drive with IP32 rating
- Selectable tubing table
- Automatic tubing break-in
- Automatic calibration procedures
- External connectivity with USB interface and I/O port
- Easy to maintain
Specification
| ubing Size (inner diameter min/max) |
0.8-4.8 mm |
| Tubing Durometer Range (min/max) |
55A-62A (Consult KD Scientific if using a higher durometer)* |
| Flow Rate (per channel, tubing dependent) | Please see tube size flow rate chart |
| Accuracy | ±1.0 % ** |
| Display | 4.3 in WQVGA TFT color display with touch screen |
| Non-Volatile Memory | Stores all settings |
| Connectors: | |
| RS-485 | IEEE-1394, 6 pos |
| USB | Type B |
| Input/Output (I/O) | 15 pin D-Sub connector |
| Footswitch Connection | Mini phono jack |
| Pressure (max) | 30 psi |
| Drive Motor | 1.8° stepper motor |
| Motor Drive Control | Microprocessor with 1/16 microstepping |
| Step Rate: | |
| Minimum | 27.5 sec/µstep |
| Maximum | 60 µsec/µstep |
| Maximum RPM: | |
| Allegro™? II | 312 RPM |
| Input Power | 30 VDC, 1.67 A using approved Allegro? power supply (included) |
| Input Power Connection | 2.5 ID x 5.5 mm OD male plug |
| Power Supply | 100-240 VAC, 50-60 Hz/30 VDC, 8 watts universal |
| Power Supply, use only a KD Scientific | Use only a KD Scientific approved power supply and line cord |
| Dimensions (Control Box) (W x D x H) |
22.9 x 19.7 x 7.6 cm (9.0 x 7.75 x 3.0 in) |
| Dimensions (Pump Motor/Head) (W x D x H) |
11.5 x 24.1 x 11.8 cm (4.5 x 9.5 x 4.63 in) |
| Weight 2.66 Kg (5.9 lbs) |
Weight 2.66 Kg (5.9 lb) |
| Operating Temperature | 4°C to 40°C (40°F to 104°F) |
| Storage Temperature | -10°C to 70°C (14°F to 158°F) |
| Ingress Protection | IP32 (pump head & drive) |
| Storage Humidity | 20% to 80% RH, non condensing |
| Method of Operation | Continuous forward/continuous reverse |
| Classification | Class I |
| Pollution | Degree 1 |
| Installation | Category II |
| Regulatory Certifications | CE, ETL (UL & CSA), CB scheme, EU RoHS, WEEE |
| Safety Declarations | EN 61010-1:2001; CB scheme |
| EMC Declaration | IEC 61326-1 Ed. 1 |
